This article will cover the most important things to remember when using LED grow light. It will help you grow healthy plants and save you a lot of hassle. This information is very relevant for beginners.
Overheating plants
If the leaves closest to the sun start turning brownish, you will know that the plant has taken too much heat. You can catch the first signs by looking at the outer edges of the leaves. This will allow you to prevent further damage. It could also indicate that the plant is too close in proximity to the sun. This problem is often solved by good ventilation.
Providing Insufficient Lighting
It is crucial to think about the size of your operation. Consider how many plants your operation has and how many LED lights are needed to properly illuminate them. Also, you should be aware of how bright the lights are. A 200W LED light will produce about 100 grams of yield. You need to make sure you have enough lighting, but not too much.
Lamps placed at an inadequate distance
Too many lights or too little lighting can cause overheating and insufficient lighting. However, it is possible to place the lights too close to or too far away from the plants. Although there is no standard for determining the distance, it is recommended that LEDs be placed between 12-18 inches and the plants.
Using Inferior Products
Because it stimulates photosynthesis, light is one of the most important factors when you grow plants. Regular incandescent lighting is not likely to result in strong, healthy plants. Full spectrum LED grow lights are recommended for the best results. These lights are specially designed to provide the light the plant requires.
Use of the Wrong Light Schedule
It is important to remember to turn off the lights when you are not using them. Although it may seem trivial, even minor changes can have a significant impact on the growth of the plant. Cannabis requires approximately 18-24 hours of sunlight during the vegetative stage, and 12 hours during the flowering stage.
Not adjusting the lights
As plants get bigger, many people forget to adjust their lights’ heights. This can lead to burnt leaves. It is important to rotate pots every so often to avoid plants leaning too far towards the lights.
Failure to Protect and Maintain the LED Lights
LED grow lights can be your friend and a valuable investment. You need to ensure that they are well taken care of. You can reap many benefits from them, and with a little preparation and maintenance, you will be able to save a lot of time and effort. To protect the LEDs inside, it is a good idea to set up a power stabiliser and connect it to them.
When switching from HIDs and LEDs, Overwatering
Regular high intensity discharge (HID) lights generate a lot heat and infrared light. This causes the plant to dry out and makes it more difficult to water. LED lights don’t produce infrared light, and they don’t emit as much heat so you don’t need to water the plants as often.
Do not forget about the other factors
While LED grow lights can be a great tool for indoor gardening, they are not able to do much by themselves. There are many factors to consider in order to get big, healthy yields. These include room temperature, airflow circulation and soil. You shouldn’t be focusing on one aspect of the growing process. Instead, focus on the entire chain and understand how it all interrelates.